Removing Door Panel On 2011 Silverado

Remove all door panel electrical connectors.

Removing door panel on 2011 silverado.

Then you want to do the same thing to the panel on the other side. You need to remove the 2 bolts that hold the pull handle on there is 1 bolt behind the door handle that opens the door and there are 2 behind the handle that is directly behind the switches. Pry out the door panel with a door panel clip tool or putty knife. Continue pulling on the bottom and sides of the panel to disengage all of the white plastic friction fasteners.

Start off by prying up this panel behind the pole handle and then pry out this little panel beyond your door handle. Jan 24 2013 1 58pm i believe there s a little pin on the underside of the base on the inside release handle that when you push up it should pull right off. Remove the two 10mm bolts underneath the handle. Locate and remove the door panel retaining screw underneath the rear of the window control module cavity.

Step 7 remove the retaining screw beneath the door pull handle with the socket wrench or ratchet. Remove the door handle bezel by inserting a flat trim removal tool between the door panel and handle bezel to release the locking tabs. Disconnect the latch cables from the door handle with pliers. Use a 7 mm socket wrench or a ratchet extension and 7 mm socket.

Gently lift panel up. Remove the door panel push pins and trim screws. Then pull the door panel starting at a lower corner and lift the panel up. Now you want to remove this 10mm bolt and these two 10mm bolts right here.

Disconnect the switch wiring harnesses. We ll fast forward as don does this. 07 13 chevrolet silverado 1500 door panel rear right passenger black 1119 06 fits. How to on removing the door panel and replacing the inside door handle on dads 2013 gmc sierra 2500hd.

Free shipping on many items. Lift the door panel up and off. Then open the clip on the front of the door lock knob use something thin. Life the lock up and off.

2011 door panel removal. 2011 chevrolet silverado 1500 134 10. Remove the 10mm bolt inside the door handle. Also replaced the door handle cable.

Lift the door panel up and out to release the door panel locking tabs. Pry up the window switch panel. Move to the bottom edge of the door panel carefully insert a flathead screwdriver or an automotive trim panel removal tool and gently pop out the friction fasteners. Remove the two 10mm bolts inside the door pull.

Now reach in behind your door panel and just pull out to release the clips. Now pry off this panel. It just pulls right out.